Tissue Grinders
BioSpec Products BeadBeater for 0.5 mm glass beads
The BeadBeater is the ultimate laboratory-scale homogenizer for disrupting aqueous suspensions of yeast, fungi or bacteria. Complete cell lysis of 10-80 g (wet weight) of cells is achieved in about three minutes of operation. The BeadBeater comes complete with a 350 ml polycarbonate chamber, rotor assembly, motor base, ice-water cooling jacket, and one pound of 0.5 mm glass beads.
Active Motif Dounce Homogenizer
Whether you are analyzing cell lysates by Western blot, or preparing chromatin for a chromatin immunoprecipitation (ChIP) experiment, the ability to obtain reliable results depends on accurate cell lysis. Active Motif's dounce homogenizer is ideal for preparation of cell lysates or chromatin, particularly if the cell and tissue samples seem to be resistant to lysis under normal detergent conditions. The dounce is available in two sizes for both small and large sample preparations. Each dounce is supplied with two pestles of different widths. One pestle fits tightly within the shaft of the dounce for maximum friction and cell disruption, while the other pestle has a looser fit and is ideal for generating a homogenous sample. Since the dounce homogenizer is made of glass it can easily be cleaned and sterilized between uses.
Cole-Parmer Essentials Glass Vessel for PTFE Tissue Grinder; 10 mL; (Glass Vessel Only)
These tissue grinders are capable of reducing cellular tissue to primary cells. Glass vessels are made of precision borosilicate glass. For Plunger please use NC1691844
Thomas Scientific Tissue Grinder Size AA. Pk 2
Consists of piston-type Teflon pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels interchangeable Precision-made for uniformity. Pestle shaft is 178 mm long with 4 mm diameter in sizes 0 and AA, 6mm diameter in larger sizes. Grinding vessel is a round bottom tube with 2 mm wall thickness, a chamber of precision bore tubing and a top reservoir with a pouring spout; unground walls are completely transparent.
Ace Glass, Inc. 30ML PESTLE ONLY 30ML PESTLE ONLY
30mL glass Pestle with 10mm rod, for use with 30mL tapered tube (50974570) as a tissue grinder. The rod can be used with a 509558293 Flex-Grip Chuck.
Ace Glass, Inc. 50ML TISSUE GRINDER C 50ML TISSUE GRINDER C
50mL tissue grinder consists of all-glass pestle and tapered tube. The conical area is for initial grinding, and the cylindrical area is for final homogenization. Interchangeably ground to 0.1 - 0.15mm clearance. The 10mm pestle rod can be used with a 509558293 Flex-Grip Chuck. Capacity represents volume with pestle inserted.
Ace Glass, Inc. 30ML TUBE ONLY 30ML TUBE ONLY
30mL glass tapered tube with a pouring lip, for use with a glass pestle (50979773) as a tissue grinder. The conical area of the tube is for initial grinding, and the cylindrical area is for final homogenization. Interchangeably ground to 0.1-0.15mm clearance. Capacity represents volume with pestle inserted.
Chemglass Life Sciences Tissue Grinder, 55mL, Potter-Elvehjem, 25mm Dia Pestle, 125mm Chamber Lgth
Tissue Grinder, 55mL, Potter-Elvehjem, 25mm Dia Pestle, 125mm Chamber Lgth. Potter-Elvehjem style tissue grinder with a Stainless Steel /PTFE pestle and an un-ground mortar. The pestle's Stainless Steel rod is for use with an overhead stirrer but the accessory "T" handle can be easily attached to assist with manual grinding. Radial serrations in the lower portion of the pestle facilitate the delivery of homogenate into the cylindrical portion of the mortar.
Chemglass Life Sciences Tissue Grinder, 30mL, Potter-Elvehjem, All Glass, 19mm Dia Pestle, 105mm Chember Lgth
Tissue Grinder, 30mL, Potter-Elvehjem, All Glass, 19mm Dia Pestle, 105mm Chember Lgth. The rounded shape on the lower portion of the pestle progressively grinds the sample and the homogenate is produced as the sample is forced through the cylindrical section. Generally used with soft tissue such as brain and liver samples.
Chemglass Life Sciences Tissue Grinder, Dounce, 1mL Working Capacity, 11mm Dia Pestle, 48mm Chamber Lgth
Tissue Grinder, Dounce, 1mL Working Capacity, 11mm Dia Pestle, 48mm Chamber Lgth. The Dounce tissue grinder is used by moving the pestle up and down and is designed for studies where the nucleus has to remain intact Supplied with two pestles that are used in the same tube, the large clearance pestle is for the initial sample reduction while the small clearance pestle is used to form the final homogenate.
Chemglass Life Sciences Tissue Grinder, 10mL, Tenbroeck, 13mm Dia Pestle, 75mm Chamber Lgth, #00 Rubber Stopper
Tissue Grinder, 10mL, Tenbroeck, 13mm Dia Pestle, 75mm Chamber Lgth, #00 Rubber Stopper. Are of the same design as the Potter Elvehjem style, but the pestle is hollow allowing the addition of ice water to keep samples chilled during the grinding process.
Chemglass Life Sciences Tissue Grinder, 30mL, Potter-Elvehjem, 19mm Dia Pestle, 105mm Chamber Lgth
Tissue Grinder, 30mL, Potter-Elvehjem, 19mm Dia Pestle, 105mm Chamber Lgth. Potter-Elvehjem style tissue grinder with a Stainless Steel /PTFE pestle and an un-ground mortar. The pestle's Stainless Steel rod is for use with an overhead stirrer but the accessory "T" handle can be easily attached to assist with manual grinding. Radial serrations in the lower portion of the pestle facilitate the delivery of homogenate into the cylindrical portion of the mortar.
Chemglass Life Sciences Tissue Grinder, 15mL, Style "B", Tapered, All Glass
Tissue Grinder, 15mL, Style "B", Tapered, All Glass. The conical shape of this tissue grinder has a large surface for grinding making it the most efficient style of tissue grinder. Samples are progressively ground to a smaller size as the pestle is turned and lowered into the tube. It is used for tougher tissue such as heart, lung or muscle. Style "B comes without a reservoir and rod style handle for use with an overhead stirrer.